Contact Us: +61 2 9818 4822

electrical_automation

Electrical and Automation

Our experienced Electrical Engineering Department can customise an electrical and automation solution for single equipment items through to full recipe based Citec/Scada plant wide control solutions, utilising the latest in Allen Bradley or Siemens processors.

Software development for upgrades and integration with existing systems or other equipment providers can also be catered for.

Hazardous fume or dust environments are a specialty with full compliance documentation and certification provided. 

Equipment pre-wiring and factory acceptance testing reduces onsite installation, site acceptance testing and commissioning of our electrical systems.

dust_collector

Central Vacuum Cleaning Systems

With all the best effort in keeping housekeeping by means of system and process design, sometimes due to operations requirements, a clean work place may be difficult.

This can be caused by rigorous cleaning required after every batch / recipe to ensure no cross contamination. The side effect of this operation requirement is that (fine) dust might escape the system and start to build up in the workplace.

To ensure constant hygiene and minimal dust build up (especially with hazardous dusts), a central vacuum cleaning system is normally designed and put in place.

A proper central vacuum cleaning (CVC) system takes into consideration the dust loading, number of suction points active at one time etc. while also considering the locations of the dust collector, hazardous dust implications and so on.

Please contact us for a no obligation discussions on how we can assist with maintaining your site housekeeping to the highest standard by installing a CVC system.

Spare Parts

As the manufacturer, Fresco Systems can supply spare parts from consumables through to specialized fabricated parts.

Our in house engineering ensures that the correct spare parts are supplied efficiently.

vibratory_motors

Vibrator

Fresco stock a range of electric vibratory motors suitable for the fluidising or densifying of products.

All have adjustable duel counter weights for force adjustment. Two, four, six and eight pole units ensure there is a frequency suitable for your application.

  • stainless_flexible_connector

Stainless Flexible Connector

Connection of pneumatic conveying lines to weigh hoppers / bins, is done by the use of the stainless steel flexible connectors.

Outlasting all other flexible connectors the interlocked sealed flexible tube provides the movement necessary to prevent weighing system errors without leaking powders into the environment.

sight_glass

Sight Glass

Direct coupled in-line polycarbonate conveying tube sight glasses providing a 360° full-view window to observe material flow in pneumatic conveying lines.

Suitable for both vacuum and pressure conveying systems the sight glasses are available in all standard conveying tube sizes.

  • long_radius_bends

Long Radium Bends

Long radius conveying tube and pipe bends are available in stainless steel, carbon steel or aluminum in sizes ranging from 38mm to 355mm in various thicknesses and radius’s from 300mm to 1,800mm.

Standard bend angles include 15°, 30°, 45°, 60° and 90° with other angles manufactured on request.

  • loadcell

Loadcell

Weighing solutions are a major part of process systems and Fresco has designed solutions from small 5kg high accuracy weigh hoppers to large 150tonne silos.

With loadcell capacity and type selected to suit the application Fresco incorporates overturning restraints, load levelers, lightning conductors, overload stops etc into the design of the mounting system. Standard loadcell types include single point, shear beam, compression, tension and S type suitable for weight hoppers, tanks, silos, platform scales etc.

  • level_indicator_2
  • level_indicator

Level Indicator

Types of level indicators are as varied as the materials they detect.

Whether used to detect high, medium or low levels in bins, hoppers or silos Fresco has a level indicator to suit your application.

  • Rotary level indicators
  • Proven reliability with prolonged motor life
  • 
Minimal motor burnout due to unique slip clutch & de-energising status
  • Interchangeable with other manufactures
  • Large range of paddle accessories to suit mounting and product variances
  • Capacitance level indicators
  • 
No moving parts
  • Ignores material buildup
  • ‘Quick set’ calibration
  • Visual status on probe
  • Genuine fail-safe integrity
  • 
• Multiple power supply capacities
compression_couplings

Compression Couplings

Compression couplings are used to join conveying tube and bends.

They offer easy installation and secure joints by mechanically locking the tube.

The couplings come complete with white nitrile rubber gasket and stainless steel earth strap. Sizes range from 38mm to 355mm diameter and can be supplied in stainless steel or carbon steel.

test